 |
| Quantity: | |
|---|---|
FK3G250-2APS-21
Fanova
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 2.3±10% |
转速 Speed(RPM) | min-1 | 3750±5% |
功率消耗 Power consumption | W | 500±10% |
声压级 Sound Pressure Level | dB(A） | 86.2±5% |
最大风量 Max. Air Flow | CFM / m3/H | 1294.7/2200 |
最大静压 Max. Static Pressure | In.wg /Pa | 6.08/1520 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FK3G250-2APS-21 is a powerhouse 250mm EC centrifugal fan engineered for extreme-pressure industrial systems. Operating at 230VAC, it delivers 2200m³/h airflow and a record 1520Pa static pressure—capable of overcoming severe duct resistance. Its bracket-mounted design and smart controls (RS485/MODBUS) make it ideal for automation-integrated heavy machinery.
Ultra-High-Pressure Dominance
Generates 1520Pa static pressure—equivalent to industrial blowers—enabling airflow through long, congested ducts or multi-stage filtration systems.
Industrial Automation Ready
RS485/MODBUS interface allows direct PLC integration for remote monitoring/control. Built-in +10VDC output powers sensors without external PSUs.
Heavy-Duty Mounting
Includes reinforced support brackets for vibration-prone installations (e.g., compressors, generators). IP54-rated housing resorts abrasive dust/oil mist.
Fail-Safe Protection
Alarm contacts (NC/COM) trigger on faults (overheat/lock-rotor). Leakage current limited to <3.5mA for electrical safety in 500W systems.
Industrial Vacuum Systems: Material handling in woodworking/metal shops.
High-Rise Building Ventilation: Overcoming duct pressure drops in skyscrapers.
Tunnel Air Management: Fume extraction in mining/subway construction.
Powder Coating Booths: Filter clog resistance in high-particulate environments.
Industrial Ovens: High-temp exhaust (60°C capable).
Q1: Can it sustain 1520Pa continuously?
A: Yes, at reduced airflow (see performance chart). For continuous max pressure, ensure ambient temps ≤40°C.
Q2: How to reduce 86.2dB(A) noise?
A: Install anti-vibration pads and avoid resonant frequencies via PWM speed tuning. Duct silencers recommended.
Q3: What’s the +10VDC output’s purpose?
A: Powers tachometers (FG signal) or external controllers—max 1.1mA load. Do not use for motor control.
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 2.3±10% |
转速 Speed(RPM) | min-1 | 3750±5% |
功率消耗 Power consumption | W | 500±10% |
声压级 Sound Pressure Level | dB(A） | 86.2±5% |
最大风量 Max. Air Flow | CFM / m3/H | 1294.7/2200 |
最大静压 Max. Static Pressure | In.wg /Pa | 6.08/1520 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FK3G250-2APS-21 is a powerhouse 250mm EC centrifugal fan engineered for extreme-pressure industrial systems. Operating at 230VAC, it delivers 2200m³/h airflow and a record 1520Pa static pressure—capable of overcoming severe duct resistance. Its bracket-mounted design and smart controls (RS485/MODBUS) make it ideal for automation-integrated heavy machinery.
Ultra-High-Pressure Dominance
Generates 1520Pa static pressure—equivalent to industrial blowers—enabling airflow through long, congested ducts or multi-stage filtration systems.
Industrial Automation Ready
RS485/MODBUS interface allows direct PLC integration for remote monitoring/control. Built-in +10VDC output powers sensors without external PSUs.
Heavy-Duty Mounting
Includes reinforced support brackets for vibration-prone installations (e.g., compressors, generators). IP54-rated housing resorts abrasive dust/oil mist.
Fail-Safe Protection
Alarm contacts (NC/COM) trigger on faults (overheat/lock-rotor). Leakage current limited to <3.5mA for electrical safety in 500W systems.
Industrial Vacuum Systems: Material handling in woodworking/metal shops.
High-Rise Building Ventilation: Overcoming duct pressure drops in skyscrapers.
Tunnel Air Management: Fume extraction in mining/subway construction.
Powder Coating Booths: Filter clog resistance in high-particulate environments.
Industrial Ovens: High-temp exhaust (60°C capable).
Q1: Can it sustain 1520Pa continuously?
A: Yes, at reduced airflow (see performance chart). For continuous max pressure, ensure ambient temps ≤40°C.
Q2: How to reduce 86.2dB(A) noise?
A: Install anti-vibration pads and avoid resonant frequencies via PWM speed tuning. Duct silencers recommended.
Q3: What’s the +10VDC output’s purpose?
A: Powers tachometers (FG signal) or external controllers—max 1.1mA load. Do not use for motor control.
