Availability: | |
---|---|
Quantity: | |
FG3G250-2AGN-90不带网罩
Fanova
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 0.6±10% |
转速 Speed(RPM) | min-1 | 2650±5% |
功率消耗 Power consumption | W | 80±10% |
声压级 Sound Pressure Level | dB(A) | 61±5% |
最大风量 Max. Air Flow | CFM / m3/H | 1023.99/1740 |
最大静压 Max. Static Pressure | In.wg /Pa | 0.904/226 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP44 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FG3G250-2AGN-90 is a high-efficiency axial fan designed for applications requiring quiet, reliable airflow in compact spaces. Featuring a 250mm galvanized steel impeller and 230VAC EC motor (Model BLEC92), it delivers robust ventilation (1,740 m³/h) while operating at exceptionally low noise levels (61 dB). Ideal for electronics cooling, light industrial use, and environments where noise sensitivity is critical.
Ultra-Quiet Performance
Generates just 61 dB(A) at full speed—quieter than conversational speech—enabling deployment in noise-sensitive spaces like offices, labs, or medical facilities.
Energy-Saving EC Motor
Consumes 80W max with 0–10VDC/PWM speed control, reducing power use by 40%+ vs. traditional AC fans. Soft-start protection extends component life.
Durable Open-Frame Design
Galvanized steel impeller resists corrosion; IP44 rating protects against dust/moisture. Operates at -25°C to 60°C for versatile indoor/outdoor use.
Server Racks & Telecom Cabinets: Direct component cooling without grille obstruction.
HVAC Fresh Air Intakes: Low-noise ventilation for residential/commercial buildings.
Audio/Recording Studios: Vents heat-sensitive equipment without disrupting acoustics.
Q: Why no protective grille?
A: Maximizes airflow efficiency; use only in areas where accidental contact is impossible (e.g., enclosed ducts or elevated mounts).
Q: Can it run continuously?
A: Yes—50,000-hour (L10) lifespan supports 24/7 operation. Ball bearings ensure reliability.
Q: How to reduce speed/noise further?
A: Apply 0–10VDC/PWM input to lower RPM. Noise drops significantly below 50% speed.
Q: Is galvanized steel safe for humid environments?
A: Yes—zinc coating prevents rust in up to 90% RH non-condensing conditions.
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 0.6±10% |
转速 Speed(RPM) | min-1 | 2650±5% |
功率消耗 Power consumption | W | 80±10% |
声压级 Sound Pressure Level | dB(A) | 61±5% |
最大风量 Max. Air Flow | CFM / m3/H | 1023.99/1740 |
最大静压 Max. Static Pressure | In.wg /Pa | 0.904/226 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP44 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FG3G250-2AGN-90 is a high-efficiency axial fan designed for applications requiring quiet, reliable airflow in compact spaces. Featuring a 250mm galvanized steel impeller and 230VAC EC motor (Model BLEC92), it delivers robust ventilation (1,740 m³/h) while operating at exceptionally low noise levels (61 dB). Ideal for electronics cooling, light industrial use, and environments where noise sensitivity is critical.
Ultra-Quiet Performance
Generates just 61 dB(A) at full speed—quieter than conversational speech—enabling deployment in noise-sensitive spaces like offices, labs, or medical facilities.
Energy-Saving EC Motor
Consumes 80W max with 0–10VDC/PWM speed control, reducing power use by 40%+ vs. traditional AC fans. Soft-start protection extends component life.
Durable Open-Frame Design
Galvanized steel impeller resists corrosion; IP44 rating protects against dust/moisture. Operates at -25°C to 60°C for versatile indoor/outdoor use.
Server Racks & Telecom Cabinets: Direct component cooling without grille obstruction.
HVAC Fresh Air Intakes: Low-noise ventilation for residential/commercial buildings.
Audio/Recording Studios: Vents heat-sensitive equipment without disrupting acoustics.
Q: Why no protective grille?
A: Maximizes airflow efficiency; use only in areas where accidental contact is impossible (e.g., enclosed ducts or elevated mounts).
Q: Can it run continuously?
A: Yes—50,000-hour (L10) lifespan supports 24/7 operation. Ball bearings ensure reliability.
Q: How to reduce speed/noise further?
A: Apply 0–10VDC/PWM input to lower RPM. Noise drops significantly below 50% speed.
Q: Is galvanized steel safe for humid environments?
A: Yes—zinc coating prevents rust in up to 90% RH non-condensing conditions.
Life Expectance | 50,000 Hours(L10),At 40℃ room, humidity 15%~65%RH |
Technical features | Motor current limitation |
Soft starting Protection | |
Under/Over voltage detection | |
Thermal overload protection for electronics/motor | |
Line undervoltage detection | |
Locked-rotor Protection | |
Reverse Polarity Protection |
Operating Temperature | Fan | -25℃ (Min. )~60℃ (Max. ) |
Heat sink of IC | 115℃ (Max. ) | |
Other electronic parts | 85℃ (Max. ) | |
Ball bearing | 80℃ (Max. ) | |
Lead Wire | 120℃ (Max. ) | |
Storage Temperature | -40℃ to 75℃ | |
Operating Humidity | 5% to 90% RH | |
Storage Humidity | 5% to 95% RH |
Life Expectance | 50,000 Hours(L10),At 40℃ room, humidity 15%~65%RH |
Technical features | Motor current limitation |
Soft starting Protection | |
Under/Over voltage detection | |
Thermal overload protection for electronics/motor | |
Line undervoltage detection | |
Locked-rotor Protection | |
Reverse Polarity Protection |
Operating Temperature | Fan | -25℃ (Min. )~60℃ (Max. ) |
Heat sink of IC | 115℃ (Max. ) | |
Other electronic parts | 85℃ (Max. ) | |
Ball bearing | 80℃ (Max. ) | |
Lead Wire | 120℃ (Max. ) | |
Storage Temperature | -40℃ to 75℃ | |
Operating Humidity | 5% to 90% RH | |
Storage Humidity | 5% to 95% RH |