 |
| Quantity: | |
|---|---|
FK3G310-2APK-60
Fanova
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 3.25±10% |
转速 Speed(RPM) | min-1 | 2640±5% |
功率消耗 Power consumption | W | 740±10% |
声压级 Sound Pressure Level | dB(A） | 84±5% |
最大风量 Max. Air Flow | CFM / m3/H | 2354/4000 |
最大静压 Max. Static Pressure | In.wg /Pa | 4.0/1000 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FK3G310-2APK-60 is a backward-curved centrifugal EC fan with an integrated support bracket, designed for high-static-pressure industrial ventilation. Driven by a 740W external-rotor BLDC motor, it combines substantial airflow (4000 m³/h) with intelligent controls (0–10V/PWM/RS485). Its die-cast aluminum housing, IP54 protection, and compliance with CE/ErP/ISO standards ensure reliability in demanding applications.
HVAC Systems: Air handling units requiring high static pressure (e.g., ducted exhausts).
Industrial Cooling: Enclosure thermal management for servers, machinery, or control cabinets.
Air Purification/Pressure Boosting: Filtration systems with resistance loads up to 1000 Pa.
Process Ventilation: Chemical, textile, or woodworking facilities needing moisture/dust resistance (IP54).
Q: Can the fan run below 184V AC?
A: No. Undervoltage protection activates below 184V to prevent damage.
Q: Is the FG signal compatible with 5V logic controllers?
A: Yes. Use the +10VDC output (max 1.1mA) with a pull-up resistor for 5V systems.
Q: Why avoid touching the impeller during startup?
A: Soft-start may delay motion; contact risks injury even at low speeds.
Q: Can I replace the power cable myself?
A: No. Cable replacement requires factory support to maintain safety certifications.
Q: Does the alarm switch (Orange/Grey wires) require external power?
A: Yes. It’s a dry contact output for connecting to monitoring systems.
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 3.25±10% |
转速 Speed(RPM) | min-1 | 2640±5% |
功率消耗 Power consumption | W | 740±10% |
声压级 Sound Pressure Level | dB(A） | 84±5% |
最大风量 Max. Air Flow | CFM / m3/H | 2354/4000 |
最大静压 Max. Static Pressure | In.wg /Pa | 4.0/1000 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FK3G310-2APK-60 is a backward-curved centrifugal EC fan with an integrated support bracket, designed for high-static-pressure industrial ventilation. Driven by a 740W external-rotor BLDC motor, it combines substantial airflow (4000 m³/h) with intelligent controls (0–10V/PWM/RS485). Its die-cast aluminum housing, IP54 protection, and compliance with CE/ErP/ISO standards ensure reliability in demanding applications.
HVAC Systems: Air handling units requiring high static pressure (e.g., ducted exhausts).
Industrial Cooling: Enclosure thermal management for servers, machinery, or control cabinets.
Air Purification/Pressure Boosting: Filtration systems with resistance loads up to 1000 Pa.
Process Ventilation: Chemical, textile, or woodworking facilities needing moisture/dust resistance (IP54).
Q: Can the fan run below 184V AC?
A: No. Undervoltage protection activates below 184V to prevent damage.
Q: Is the FG signal compatible with 5V logic controllers?
A: Yes. Use the +10VDC output (max 1.1mA) with a pull-up resistor for 5V systems.
Q: Why avoid touching the impeller during startup?
A: Soft-start may delay motion; contact risks injury even at low speeds.
Q: Can I replace the power cable myself?
A: No. Cable replacement requires factory support to maintain safety certifications.
Q: Does the alarm switch (Orange/Grey wires) require external power?
A: Yes. It’s a dry contact output for connecting to monitoring systems.
