 |
| Quantity: | |
|---|---|
FK3G400-2AAB-67
Fanova
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 3.1±10% |
转速 Speed(RPM) | min-1 | 1800±5% |
功率消耗 Power consumption | W | 700±10% |
声压级 Sound Pressure Level | dB(A） | 79±5% |
最大风量 Max. Air Flow | CFM / m3/H | 3707.55/6300 |
最大静压 Max. Static Pressure | In.wg /Pa | 3.6/900 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FK3G400-2AAB-67 is a bracket-mounted EC centrifugal fan engineered for extreme industrial cooling. Combining 700W power and 900 Pa static pressure with a vibration-dampening bracket, it delivers massive airflow (6,300 m³/h) for heavy machinery while resisting dust/moisture (IP54). Pre-wired for Modbus and fault alerts, it’s built for harsh factory floors.
Vibration-Proof Powerhouse
Integrated steel bracket absorbs shocks from equipment like CNC mills — cuts noise by 15% vs bolt-on fans at 1,800 RPM.
Industrial-Grade Air Thrust
Eight aluminum blades push through duct obstructions (e.g., filter walls) without stall — critical for ovens or dust collectors.
Smart Machine Integration
RS485 Modbus (RSA/RSB) + alarm contacts (NC/COM) enable PLC-controlled shutdowns during overheating or RPM drops.
Dust Fighter
IP54 sealing protects electronics from metal chips or flour dust — survives 50,000 hours in woodshops or foundries.
Heavy Machinery: Forge press cooling, injection molding thermal control.
Material Handling: Grain silo ventilation, powder conveyor airflow.
Process Heating: Industrial drying tunnels, paint booth exhausts.
High-Vibration Sites: Compressor rooms, generator set cooling.
Q: Can the bracket handle vertical mounting?
A: Yes — designed for 360° orientation. Use all four bolts for >50kg equipment.
Q: What triggers the orange/gray alarm wires?
A: Closes circuit on motor fault (e.g., temperature >85°C or RPM <500). Wire to emergency stop.
Q: Does 700W require special wiring?
A: Use ≥14 AWG cables for 230VAC. Avoid extension cords — connect directly to distribution blocks.
Q: Why aluminum blades instead of steel?
A: 30% lighter weight reduces bearing load — extends life in 24/7 operations.
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 3.1±10% |
转速 Speed(RPM) | min-1 | 1800±5% |
功率消耗 Power consumption | W | 700±10% |
声压级 Sound Pressure Level | dB(A） | 79±5% |
最大风量 Max. Air Flow | CFM / m3/H | 3707.55/6300 |
最大静压 Max. Static Pressure | In.wg /Pa | 3.6/900 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FK3G400-2AAB-67 is a bracket-mounted EC centrifugal fan engineered for extreme industrial cooling. Combining 700W power and 900 Pa static pressure with a vibration-dampening bracket, it delivers massive airflow (6,300 m³/h) for heavy machinery while resisting dust/moisture (IP54). Pre-wired for Modbus and fault alerts, it’s built for harsh factory floors.
Vibration-Proof Powerhouse
Integrated steel bracket absorbs shocks from equipment like CNC mills — cuts noise by 15% vs bolt-on fans at 1,800 RPM.
Industrial-Grade Air Thrust
Eight aluminum blades push through duct obstructions (e.g., filter walls) without stall — critical for ovens or dust collectors.
Smart Machine Integration
RS485 Modbus (RSA/RSB) + alarm contacts (NC/COM) enable PLC-controlled shutdowns during overheating or RPM drops.
Dust Fighter
IP54 sealing protects electronics from metal chips or flour dust — survives 50,000 hours in woodshops or foundries.
Heavy Machinery: Forge press cooling, injection molding thermal control.
Material Handling: Grain silo ventilation, powder conveyor airflow.
Process Heating: Industrial drying tunnels, paint booth exhausts.
High-Vibration Sites: Compressor rooms, generator set cooling.
Q: Can the bracket handle vertical mounting?
A: Yes — designed for 360° orientation. Use all four bolts for >50kg equipment.
Q: What triggers the orange/gray alarm wires?
A: Closes circuit on motor fault (e.g., temperature >85°C or RPM <500). Wire to emergency stop.
Q: Does 700W require special wiring?
A: Use ≥14 AWG cables for 230VAC. Avoid extension cords — connect directly to distribution blocks.
Q: Why aluminum blades instead of steel?
A: 30% lighter weight reduces bearing load — extends life in 24/7 operations.
