 |
| Quantity: | |
|---|---|
FD3G133-24GL-70
Fanova
Nominal Voltage | VDC | 24 |
Nominal voltage range | VDC | 16~28 |
Current draw | A | 4.4±10% |
Speed(RPM) | min-1 | 1500±5% |
Power consumption | W | 105±10% |
Sound Pressure Level | dB(A） | 64±5% |
Max. Air Flow | CFM / m3/H | 442.552/752 |
Max. Static Pressure | In.wg /Pa | 0.82/205 |
Insulation class | ~ | Class B |
Degree of protection | ~ | IP44 |
Control Input | ~ | 0~10VDC / PWM |
Signal Output | ~ | FG (Tach output ) |
The FD3G133-24GL-70 is a compact dual-inlet centrifugal fan optimized for low-voltage systems. Designed for applications requiring efficient bidirectional airflow at 24VDC, it combines a galvanized steel impeller with whisper-quiet operation. Its IP44-rated construction ensures reliability in space-constrained environments like electronics enclosures or portable equipment.
Ultra-Low Voltage Operation
Runs efficiently at 24VDC (16–28V range), ideal for battery/solar-powered systems or low-power control circuits without voltage converters.
High-Current Robustness
Handles 4.4A current for stable torque output, preventing stalling in dynamic load conditions like variable duct pressures.
Space-Optimized Dual Intake
Bidirectional inlets maximize airflow (752 m³/h) in tight installations – ideal for embedded systems where front/rear clearance is limited.
Vibration-Damped Acoustics
38-blade galvanized impeller minimizes harmonic resonance, maintaining 64 dB(A) noise levels even at 1500 RPM.
Mobile Medical Devices: Portable ventilators, diagnostic equipment.
Low-Voltage HVAC: Bus/train cabin ventilation, RV climate systems.
Renewable Energy: Solar inverter cooling, battery cabinet airflow.
Compact Machinery: 3D printers, laser engravers, lab instruments.
Q: Can it replace 48V models in existing setups?
A: No – electrical systems require redesign for 24V compatibility (higher current/power wiring).
Q: Does dual intake double the airflow?
A: No – it increases efficiency by 15–20% vs. single inlet but requires unobstructed side access.
Q: Minimum wire gauge for 4.4A draw?
A: Use ≥20AWG cables under 3m; upgrade to 18AWG for longer runs to prevent voltage drop.
Q: Corrosion resistance in outdoor use?
A: Galvanized steel resists humidity; pair with IP44 rating for damp environments (non-submerged).
Nominal Voltage | VDC | 24 |
Nominal voltage range | VDC | 16~28 |
Current draw | A | 4.4±10% |
Speed(RPM) | min-1 | 1500±5% |
Power consumption | W | 105±10% |
Sound Pressure Level | dB(A） | 64±5% |
Max. Air Flow | CFM / m3/H | 442.552/752 |
Max. Static Pressure | In.wg /Pa | 0.82/205 |
Insulation class | ~ | Class B |
Degree of protection | ~ | IP44 |
Control Input | ~ | 0~10VDC / PWM |
Signal Output | ~ | FG (Tach output ) |
The FD3G133-24GL-70 is a compact dual-inlet centrifugal fan optimized for low-voltage systems. Designed for applications requiring efficient bidirectional airflow at 24VDC, it combines a galvanized steel impeller with whisper-quiet operation. Its IP44-rated construction ensures reliability in space-constrained environments like electronics enclosures or portable equipment.
Ultra-Low Voltage Operation
Runs efficiently at 24VDC (16–28V range), ideal for battery/solar-powered systems or low-power control circuits without voltage converters.
High-Current Robustness
Handles 4.4A current for stable torque output, preventing stalling in dynamic load conditions like variable duct pressures.
Space-Optimized Dual Intake
Bidirectional inlets maximize airflow (752 m³/h) in tight installations – ideal for embedded systems where front/rear clearance is limited.
Vibration-Damped Acoustics
38-blade galvanized impeller minimizes harmonic resonance, maintaining 64 dB(A) noise levels even at 1500 RPM.
Mobile Medical Devices: Portable ventilators, diagnostic equipment.
Low-Voltage HVAC: Bus/train cabin ventilation, RV climate systems.
Renewable Energy: Solar inverter cooling, battery cabinet airflow.
Compact Machinery: 3D printers, laser engravers, lab instruments.
Q: Can it replace 48V models in existing setups?
A: No – electrical systems require redesign for 24V compatibility (higher current/power wiring).
Q: Does dual intake double the airflow?
A: No – it increases efficiency by 15–20% vs. single inlet but requires unobstructed side access.
Q: Minimum wire gauge for 4.4A draw?
A: Use ≥20AWG cables under 3m; upgrade to 18AWG for longer runs to prevent voltage drop.
Q: Corrosion resistance in outdoor use?
A: Galvanized steel resists humidity; pair with IP44 rating for damp environments (non-submerged).
