 |
| Quantity: | |
|---|---|
FB3G355-2AAY-20
Fanova
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 2.0±10% |
转速 Speed(RPM) | min-1 | 1920±5% |
功率消耗 Power consumption | W | 480±10% |
声压级 Sound Pressure Level | dB(A） | 74±5% |
最大风量 Max. Air Flow | CFM / m3/H | 2301/3910 |
最大静压 Max. Static Pressure | In.wg /Pa | 2.94/735 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FB3G355-2AAY-20 is a high-pressure 230V AC centrifugal blower engineered for demanding industrial ventilation. Featuring a 355mm aluminum impeller and EC motor technology, it excels in overcoming extreme system resistance while maintaining robust airflow – ideal for applications where static pressure is critical.
Exceptional Static Pressure Performance
Delivers 735 Pa (2.94 In.wg) – the highest in its class – enabling airflow through dense filters, long ductwork, or compact industrial systems.
Optimized Power-to-Flow Ratio
Moves 3,910 m³/h (2,301 CFM) at just 480W ±10%, balancing efficiency with heavy-duty performance.
Industrial Control Ecosystem
Integrates RS485 MODBUS (green/purple wires), 0-10VDC/PWM input (yellow), and +10VDC output (red) for sensor power/control daisy-chaining.
Proactive System Monitoring
5-pulse/rev FG signal (white wire) + alarm contacts (orange/gray) enable real-time diagnostics and instant fault alerts.
High-Resistance Ventilation: Paint booth exhaust, chemical fume extraction, industrial dust collection systems.
Process Cooling: Plastic extrusion equipment, laser cutting enclosures, high-temperature oven cooling.
Power Electronics: Large UPS thermal management, wind turbine converter cooling, substation ventilation.
HVAC Systems: Commercial ERV/HRV units, pressurized cleanroom airflow, hospital isolation room exhaust.
Heavy Equipment: Mining machinery cooling, ship engine room ventilation, foundry air supply systems.
Q: What makes this fan ideal for ducted systems?
A: Its 735 Pa static pressure overcomes resistance in long/dense duct networks where standard fans fail.
Q: Can I power sensors using the fan’s control interface?
A: Yes – the +10VDC output (red wire) provides 1.1mA for temperature/humidity sensors.
Q: How do I connect it to SCADA systems?
A: Use RS485 MODBUS (green/purple wires) for industrial PLC/BMS integration.
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 2.0±10% |
转速 Speed(RPM) | min-1 | 1920±5% |
功率消耗 Power consumption | W | 480±10% |
声压级 Sound Pressure Level | dB(A） | 74±5% |
最大风量 Max. Air Flow | CFM / m3/H | 2301/3910 |
最大静压 Max. Static Pressure | In.wg /Pa | 2.94/735 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FB3G355-2AAY-20 is a high-pressure 230V AC centrifugal blower engineered for demanding industrial ventilation. Featuring a 355mm aluminum impeller and EC motor technology, it excels in overcoming extreme system resistance while maintaining robust airflow – ideal for applications where static pressure is critical.
Exceptional Static Pressure Performance
Delivers 735 Pa (2.94 In.wg) – the highest in its class – enabling airflow through dense filters, long ductwork, or compact industrial systems.
Optimized Power-to-Flow Ratio
Moves 3,910 m³/h (2,301 CFM) at just 480W ±10%, balancing efficiency with heavy-duty performance.
Industrial Control Ecosystem
Integrates RS485 MODBUS (green/purple wires), 0-10VDC/PWM input (yellow), and +10VDC output (red) for sensor power/control daisy-chaining.
Proactive System Monitoring
5-pulse/rev FG signal (white wire) + alarm contacts (orange/gray) enable real-time diagnostics and instant fault alerts.
High-Resistance Ventilation: Paint booth exhaust, chemical fume extraction, industrial dust collection systems.
Process Cooling: Plastic extrusion equipment, laser cutting enclosures, high-temperature oven cooling.
Power Electronics: Large UPS thermal management, wind turbine converter cooling, substation ventilation.
HVAC Systems: Commercial ERV/HRV units, pressurized cleanroom airflow, hospital isolation room exhaust.
Heavy Equipment: Mining machinery cooling, ship engine room ventilation, foundry air supply systems.
Q: What makes this fan ideal for ducted systems?
A: Its 735 Pa static pressure overcomes resistance in long/dense duct networks where standard fans fail.
Q: Can I power sensors using the fan’s control interface?
A: Yes – the +10VDC output (red wire) provides 1.1mA for temperature/humidity sensors.
Q: How do I connect it to SCADA systems?
A: Use RS485 MODBUS (green/purple wires) for industrial PLC/BMS integration.
