 |
| Quantity: | |
|---|---|
FG3G500-2APL-20带网罩
Fanova
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 2.0±10% |
转速 Speed(RPM) | min-1 | 1250±5% |
功率消耗 Power consumption | W | 450±10% |
声压级 Sound Pressure Level | dB(A） | 71±5% |
最大风量 Max. Air Flow | CFM / m3/H | 3990.62/6781 |
最大静压 Max. Static Pressure | In.wg /Pa | 1.14/285 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FG3G500-2APL-20 EC Axial Fan with Safety Grille by Fanova (Suzhou) is engineered for industrial-scale airflow in safety-critical environments. Featuring a massive 500mm fiberglass-reinforced impeller and an energy-efficient EC motor (Model: BLEC102), it delivers 6781 m³/h airflow—equivalent to cooling large workshops—while maintaining low noise (71 dB(A)). The integrated wire guard ensures IP54 protection against debris and accidental contact.
Industrial-Grade Airflow
Generates 6781 m³/h—enough to ventilate 50m² spaces—at just 1250 RPM for reduced noise. Wide voltage range (184–270VAC) ensures stability in fluctuating power grids.
Smart Control Ecosystem
Supports 0–10VDC/PWM, RS485 (Modbus), and tachometer output (FG: 5 pulses/revolution). Built-in +10VDC reference simplifies daisy-chaining multiple fans.
Heavy-Duty Safety Design
Reinforced grille withstands impacts while preventing finger contact. IP54 rating protects against dust/liquid ingress in harsh environments like factories or farms.
Energy-Efficient EC Operation
Consumes 450W—30% less than traditional AC fans—with soft-start protection and thermal overload cutoffs. Ball bearings guarantee 50,000-hour lifespan at 40°C.
Industrial Ventilation: Factory floor cooling, welding fume extraction, and paint booth airflow.
Agricultural Air Management: Livestock barn ventilation and grain drying systems.
Large-Scale HVAC: Warehouse air circulation and commercial kitchen exhaust boosters.
Process Cooling: Industrial ovens, plastic extruders, and heavy machinery thermal control.
Q1: Does the grille require extra maintenance?
A: No—galvanized steel construction resists corrosion. Clean with compressed air quarterly in dusty environments.
Q2: Can RS485 replace 0–10VDC control?
A: Yes. Use Modbus RTU for digital speed/status control over long distances (up to 1200m).
Q3: Why only 5 blades on such a large fan?
A: Fewer blades reduce turbulence noise while maintaining efficiency at lower RPM—critical for human comfort near the unit.
Q4: How to handle the alarm contacts (NC/COM)?
A: Wire to a PLC or light to detect fan failure (opens on fault). See Section 5 wiring diagram.
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 2.0±10% |
转速 Speed(RPM) | min-1 | 1250±5% |
功率消耗 Power consumption | W | 450±10% |
声压级 Sound Pressure Level | dB(A） | 71±5% |
最大风量 Max. Air Flow | CFM / m3/H | 3990.62/6781 |
最大静压 Max. Static Pressure | In.wg /Pa | 1.14/285 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FG3G500-2APL-20 EC Axial Fan with Safety Grille by Fanova (Suzhou) is engineered for industrial-scale airflow in safety-critical environments. Featuring a massive 500mm fiberglass-reinforced impeller and an energy-efficient EC motor (Model: BLEC102), it delivers 6781 m³/h airflow—equivalent to cooling large workshops—while maintaining low noise (71 dB(A)). The integrated wire guard ensures IP54 protection against debris and accidental contact.
Industrial-Grade Airflow
Generates 6781 m³/h—enough to ventilate 50m² spaces—at just 1250 RPM for reduced noise. Wide voltage range (184–270VAC) ensures stability in fluctuating power grids.
Smart Control Ecosystem
Supports 0–10VDC/PWM, RS485 (Modbus), and tachometer output (FG: 5 pulses/revolution). Built-in +10VDC reference simplifies daisy-chaining multiple fans.
Heavy-Duty Safety Design
Reinforced grille withstands impacts while preventing finger contact. IP54 rating protects against dust/liquid ingress in harsh environments like factories or farms.
Energy-Efficient EC Operation
Consumes 450W—30% less than traditional AC fans—with soft-start protection and thermal overload cutoffs. Ball bearings guarantee 50,000-hour lifespan at 40°C.
Industrial Ventilation: Factory floor cooling, welding fume extraction, and paint booth airflow.
Agricultural Air Management: Livestock barn ventilation and grain drying systems.
Large-Scale HVAC: Warehouse air circulation and commercial kitchen exhaust boosters.
Process Cooling: Industrial ovens, plastic extruders, and heavy machinery thermal control.
Q1: Does the grille require extra maintenance?
A: No—galvanized steel construction resists corrosion. Clean with compressed air quarterly in dusty environments.
Q2: Can RS485 replace 0–10VDC control?
A: Yes. Use Modbus RTU for digital speed/status control over long distances (up to 1200m).
Q3: Why only 5 blades on such a large fan?
A: Fewer blades reduce turbulence noise while maintaining efficiency at lower RPM—critical for human comfort near the unit.
Q4: How to handle the alarm contacts (NC/COM)?
A: Wire to a PLC or light to detect fan failure (opens on fault). See Section 5 wiring diagram.
