 |
| Quantity: | |
|---|---|
FG3G500-2APN-20不带网罩
Fanova
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 2.0±10% |
转速 Speed(RPM) | min-1 | 1250±5% |
功率消耗 Power consumption | W | 450±10% |
声压级 Sound Pressure Level | dB(A） | 71±5% |
最大风量 Max. Air Flow | CFM / m3/H | 3990.62/6781 |
最大静压 Max. Static Pressure | In.wg /Pa | 1.14/285 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FG3G500-2APN-20 is an open-frame axial EC fan designed for high-efficiency ventilation in integrated equipment systems. With a 500mm glass-fiber-reinforced impeller and BLEC102 EC motor, it delivers 6,781 m³/h (3,991 CFM) airflow at 285 Pa (1.14 in.wg) static pressure while operating at ultra-quiet 71 dB(A). Excluding a protective grille, it maximizes airflow and simplifies integration into custom enclosures, machinery, or ductless setups.
Unrestricted Airflow Design
Omits protective grilles to eliminate airflow resistance, boosting efficiency by 15% versus mesh-covered equivalents. Ideal for embedded systems where external contact is precluded.
Lightweight & Low-Noise Operation
The 4kg composite impeller reduces inertia, enabling quieter performance (71 dB(A)) at 1,250 RPM. Ball bearings ensure smooth rotation for 24/7 reliability.
Plug-and-Play Integration
Pre-wired for 0–10V/PWM/RS485 control and includes tachometer output (FG signal). Mounts in any orientation (IP54-rated) for flexible installation in tight spaces.
Industrial Machinery Cooling: CNC equipment, compressors, or generators requiring direct impeller access.
Custom Ventilation Arrays: Multi-fan clusters in air handling units (AHUs) or heat recovery systems.
Agricultural Air Circulation: High-volume airflow in grain dryers or livestock tunnels.
Energy-Efficient Retrofit: Replacement for traditional AC fans in OEM equipment.
Q1: Is it safe to operate without a protective grille?
A1: Yes—when installed in enclosed/guarded systems per IEC 60204-1. Not recommended for exposed locations with personnel access.
Q2: Can grilles be added later?
A2: Custom grilles (e.g., wire mesh) can be retrofitted—consult Fanova for compatible options.
Q3: How does open-frame design impact maintenance?
A3: Simplifies impeller cleaning but requires periodic inspection for debris ingress (recommended every 500 operating hours).
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 2.0±10% |
转速 Speed(RPM) | min-1 | 1250±5% |
功率消耗 Power consumption | W | 450±10% |
声压级 Sound Pressure Level | dB(A） | 71±5% |
最大风量 Max. Air Flow | CFM / m3/H | 3990.62/6781 |
最大静压 Max. Static Pressure | In.wg /Pa | 1.14/285 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FG3G500-2APN-20 is an open-frame axial EC fan designed for high-efficiency ventilation in integrated equipment systems. With a 500mm glass-fiber-reinforced impeller and BLEC102 EC motor, it delivers 6,781 m³/h (3,991 CFM) airflow at 285 Pa (1.14 in.wg) static pressure while operating at ultra-quiet 71 dB(A). Excluding a protective grille, it maximizes airflow and simplifies integration into custom enclosures, machinery, or ductless setups.
Unrestricted Airflow Design
Omits protective grilles to eliminate airflow resistance, boosting efficiency by 15% versus mesh-covered equivalents. Ideal for embedded systems where external contact is precluded.
Lightweight & Low-Noise Operation
The 4kg composite impeller reduces inertia, enabling quieter performance (71 dB(A)) at 1,250 RPM. Ball bearings ensure smooth rotation for 24/7 reliability.
Plug-and-Play Integration
Pre-wired for 0–10V/PWM/RS485 control and includes tachometer output (FG signal). Mounts in any orientation (IP54-rated) for flexible installation in tight spaces.
Industrial Machinery Cooling: CNC equipment, compressors, or generators requiring direct impeller access.
Custom Ventilation Arrays: Multi-fan clusters in air handling units (AHUs) or heat recovery systems.
Agricultural Air Circulation: High-volume airflow in grain dryers or livestock tunnels.
Energy-Efficient Retrofit: Replacement for traditional AC fans in OEM equipment.
Q1: Is it safe to operate without a protective grille?
A1: Yes—when installed in enclosed/guarded systems per IEC 60204-1. Not recommended for exposed locations with personnel access.
Q2: Can grilles be added later?
A2: Custom grilles (e.g., wire mesh) can be retrofitted—consult Fanova for compatible options.
Q3: How does open-frame design impact maintenance?
A3: Simplifies impeller cleaning but requires periodic inspection for debris ingress (recommended every 500 operating hours).
