 |
| Quantity: | |
|---|---|
FW3G500-2APF-30圆形导风筒
Fanova
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 3.1±10% |
转速 Speed(RPM) | min-1 | 1550±5% |
功率消耗 Power consumption | W | 700±10% |
声压级 Sound Pressure Level | dB(A） | 74±5% |
最大风量 Max. Air Flow | CFM / m3/H | 5149.375/8750 |
最大静压 Max. Static Pressure | In.wg /Pa | 1.0/250 |
绝缘等级 Insulation class | ~ | Class F |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FW3G500-2APF-30 is a high-capacity axial fan with an integrated circular wind guide, engineered for large-scale industrial ventilation. Combining a 500mm fiberglass-reinforced impeller and a powerful BLEC138 EC motor, it delivers exceptional airflow (8,750 m³/h) while maintaining directional control. Designed for harsh environments, its IP54-rated housing ensures resilience against dust and moisture, meeting CE/RoHS/ErP standards for industrial compliance.
Optimized Airflow with Wind Guide
Features a circular wind guide to channel airflow efficiently, reducing turbulence and increasing effective range. Delivers 8,750 m³/h (5,149 CFM) at 250 Pa static pressure—ideal for long-duct ventilation.
Heavy-Duty EC Motor Performance
Powered by a 230V EC motor with soft-start technology and wide voltage tolerance (184–270 VAC). Consumes 700W ±10% under full load while supporting multi-protocol control (0–10VDC/PWM/RS485 MODBUS).
Industrial-Grade Resilience
IP54 protection guards against dust ingress and water splashes. Ball bearings ensure 50,000-hour lifespan (L10) in continuous operation (-25°C to 60°C), even in high-vibration settings.
Factory ventilation systems (workshops, foundries)
Agricultural air circulation (barns, greenhouses)
Tunnel and ducted exhaust systems
Heat recovery units requiring directional airflow
Q1: How does the wind guide enhance performance?
A1: It concentrates airflow into a focused stream, minimizing dispersion and increasing effective reach by 15–20% versus open axial fans.
Q2: Can MODBUS communication replace 0–10VDC control?
A2: Yes—connect the green (RSA) and purple (RSB) wires for MODBUS-RTU protocol, enabling speed control and system diagnostics.
Q3: Is this fan suitable for outdoor use?
A3: Yes, IP54 rating protects against rain and dust. Avoid direct submersion or high-pressure water jets.
Q4: What maintenance does it require?
A4: Minimal—clean the wind guide quarterly with compressed air. No lubrication needed for sealed ball bearings.
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 3.1±10% |
转速 Speed(RPM) | min-1 | 1550±5% |
功率消耗 Power consumption | W | 700±10% |
声压级 Sound Pressure Level | dB(A） | 74±5% |
最大风量 Max. Air Flow | CFM / m3/H | 5149.375/8750 |
最大静压 Max. Static Pressure | In.wg /Pa | 1.0/250 |
绝缘等级 Insulation class | ~ | Class F |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The FW3G500-2APF-30 is a high-capacity axial fan with an integrated circular wind guide, engineered for large-scale industrial ventilation. Combining a 500mm fiberglass-reinforced impeller and a powerful BLEC138 EC motor, it delivers exceptional airflow (8,750 m³/h) while maintaining directional control. Designed for harsh environments, its IP54-rated housing ensures resilience against dust and moisture, meeting CE/RoHS/ErP standards for industrial compliance.
Optimized Airflow with Wind Guide
Features a circular wind guide to channel airflow efficiently, reducing turbulence and increasing effective range. Delivers 8,750 m³/h (5,149 CFM) at 250 Pa static pressure—ideal for long-duct ventilation.
Heavy-Duty EC Motor Performance
Powered by a 230V EC motor with soft-start technology and wide voltage tolerance (184–270 VAC). Consumes 700W ±10% under full load while supporting multi-protocol control (0–10VDC/PWM/RS485 MODBUS).
Industrial-Grade Resilience
IP54 protection guards against dust ingress and water splashes. Ball bearings ensure 50,000-hour lifespan (L10) in continuous operation (-25°C to 60°C), even in high-vibration settings.
Factory ventilation systems (workshops, foundries)
Agricultural air circulation (barns, greenhouses)
Tunnel and ducted exhaust systems
Heat recovery units requiring directional airflow
Q1: How does the wind guide enhance performance?
A1: It concentrates airflow into a focused stream, minimizing dispersion and increasing effective reach by 15–20% versus open axial fans.
Q2: Can MODBUS communication replace 0–10VDC control?
A2: Yes—connect the green (RSA) and purple (RSB) wires for MODBUS-RTU protocol, enabling speed control and system diagnostics.
Q3: Is this fan suitable for outdoor use?
A3: Yes, IP54 rating protects against rain and dust. Avoid direct submersion or high-pressure water jets.
Q4: What maintenance does it require?
A4: Minimal—clean the wind guide quarterly with compressed air. No lubrication needed for sealed ball bearings.
