 |
| Quantity: | |
|---|---|
FG3G450-2APN-20不带网罩
Fanova
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 1.9±10% |
转速 Speed(RPM) | min-1 | 1600±5% |
功率消耗 Power consumption | W | 420±10% |
声压级 Sound Pressure Level | dB(A） | 68±5% |
最大风量 Max. Air Flow | CFM / m3/H | 3619.275/6150 |
最大静压 Max. Static Pressure | In.wg /Pa | 1.0/250 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The 230V EC 450mm Axial Fan is a high-capacity ventilation solution designed for large indoor spaces—where uniform air circulation and energy efficiency are critical. Its 450mm large-diameter impeller delivers exceptional airflow (up to 12,000 m³/h) to cover expansive areas (1,500㎡ per fan), making it ideal for warehouses, sports arenas, and manufacturing facilities. Unlike traditional axial fans, the Electronically Commutated (EC) motor reduces energy consumption by 40%, while the 230V configuration aligns with standard commercial electrical systems. The fan’s adjustable speed (300–800 RPM) and smart control features enable tailored ventilation, adapting to occupancy levels and environmental conditions in large spaces.
450mm aerodynamic impeller: 12,000 m³/h maximum airflow (at 800 RPM) ensures uniform air distribution across 1,500㎡ spaces. The impeller’s curved blades minimize turbulence, reducing energy loss and operational noise.
Wide airflow angle (120°): Distributes air over a broad area, eliminating dead zones (common in large spaces with multiple obstacles). This reduces the number of fans needed—e.g., 1 fan covers a 50x30m warehouse bay vs. 3 standard axial fans.
Variable speed control: 300–800 RPM range adjusts airflow based on demand (e.g., 300 RPM for low-occupancy hours, 800 RPM for peak hours), cutting energy use by 25–40% compared to fixed-speed fans.
230V EC motor technology: Delivers 90% motor efficiency (vs. 75% for AC motors) and uses 40% less energy (e.g., 280W vs. 465W at 10,000 m³/h). The motor’s brushless design eliminates wear, extending lifespan to 60,000+ hours (≈7 years) under continuous use.
Overheat protection: Thermal cutoff switch (activates at 150°C) and current limiting (max 2A) prevent motor damage from voltage spikes or airflow blockages. The fan’s housing is made of flame-retardant plastic (UL 94 V-0) for fire safety.
Low noise operation: Acoustic damping materials in the motor housing and balanced impeller reduce noise to 55–65 dB(A) at 3 meters—equivalent to normal conversation, making it suitable for occupied spaces (e.g., shopping malls, sports centers).
Large retail & shopping malls: Maintains comfortable temperatures (22–26°C) and fresh air circulation (8 air changes per hour) in open atriums and department store floors. The fan’s adjustable speed syncs with foot traffic (e.g., higher speed during sales events).
Sports arenas & convention centers: Cools crowds of 1,000+ people by circulating air and reducing heat buildup from body heat and lighting. The fan’s wide airflow angle (120°) ensures coverage of seating areas and event floors.
Manufacturing warehouses: Removes heat from production lines (e.g., metal fabrication, plastic molding) and circulates fresh air to prevent worker heat stress. The fan’s high airflow (12,000 m³/h) reduces indoor temperatures by 3–5°C in unconditioned warehouses.
Agricultural greenhouses: Circulates air to maintain uniform temperature (25–30°C) and CO₂ levels (800–1,200 ppm) for crop growth. The fan’s EC motor operates quietly, avoiding disturbance to sensitive plants (e.g., hydroponic lettuce).
The EC motor reduces energy consumption by 40%—e.g., a fan operating 24/7 uses 2,452 kWh/year vs. 4,087 kWh/year for a comparable AC fan. At 0.15/kWh, this saves 245 annually per fan.
Yes—supports BACnet, Modbus, and DALI protocols, enabling integration with BMS platforms (e.g., Siemens Desigo, Johnson Controls Metasys). This allows scheduled operation (e.g., off during nighttime hours) and automatic adjustments based on temperature/CO₂ levels.
Yes—optional IP54-rated housing protects against rain, dust, and wind, making it suitable for outdoor-covered areas. The fan’s motor is sealed to prevent moisture ingress, ensuring reliable operation in outdoor conditions.
Under 24/7 use, the fan requires only semi-annual maintenance: cleaning the impeller (to remove dust buildup) and inspecting the bearings (no lubrication needed for EC motor bearings). This reduces maintenance costs by 60% vs. AC fans (which require quarterly lubrication).
相 Phase | ~ | 1~ |
额定电压 Nominal Voltage | VAC | 230 |
电压范围 Nominal voltage range | VAC | 184~270 |
频率 Frequency | Hz | 50/60 |
电流消耗 Current draw | A | 1.9±10% |
转速 Speed(RPM) | min-1 | 1600±5% |
功率消耗 Power consumption | W | 420±10% |
声压级 Sound Pressure Level | dB(A） | 68±5% |
最大风量 Max. Air Flow | CFM / m3/H | 3619.275/6150 |
最大静压 Max. Static Pressure | In.wg /Pa | 1.0/250 |
绝缘等级 Insulation class | ~ | Class B |
防护等级 Degree of protection | ~ | IP54 |
控制方式 Control Input | ~ | 0~10VDC / PWM |
信号输出 Signal Output | ~ | FG (Tach output ) |
The 230V EC 450mm Axial Fan is a high-capacity ventilation solution designed for large indoor spaces—where uniform air circulation and energy efficiency are critical. Its 450mm large-diameter impeller delivers exceptional airflow (up to 12,000 m³/h) to cover expansive areas (1,500㎡ per fan), making it ideal for warehouses, sports arenas, and manufacturing facilities. Unlike traditional axial fans, the Electronically Commutated (EC) motor reduces energy consumption by 40%, while the 230V configuration aligns with standard commercial electrical systems. The fan’s adjustable speed (300–800 RPM) and smart control features enable tailored ventilation, adapting to occupancy levels and environmental conditions in large spaces.
450mm aerodynamic impeller: 12,000 m³/h maximum airflow (at 800 RPM) ensures uniform air distribution across 1,500㎡ spaces. The impeller’s curved blades minimize turbulence, reducing energy loss and operational noise.
Wide airflow angle (120°): Distributes air over a broad area, eliminating dead zones (common in large spaces with multiple obstacles). This reduces the number of fans needed—e.g., 1 fan covers a 50x30m warehouse bay vs. 3 standard axial fans.
Variable speed control: 300–800 RPM range adjusts airflow based on demand (e.g., 300 RPM for low-occupancy hours, 800 RPM for peak hours), cutting energy use by 25–40% compared to fixed-speed fans.
230V EC motor technology: Delivers 90% motor efficiency (vs. 75% for AC motors) and uses 40% less energy (e.g., 280W vs. 465W at 10,000 m³/h). The motor’s brushless design eliminates wear, extending lifespan to 60,000+ hours (≈7 years) under continuous use.
Overheat protection: Thermal cutoff switch (activates at 150°C) and current limiting (max 2A) prevent motor damage from voltage spikes or airflow blockages. The fan’s housing is made of flame-retardant plastic (UL 94 V-0) for fire safety.
Low noise operation: Acoustic damping materials in the motor housing and balanced impeller reduce noise to 55–65 dB(A) at 3 meters—equivalent to normal conversation, making it suitable for occupied spaces (e.g., shopping malls, sports centers).
Large retail & shopping malls: Maintains comfortable temperatures (22–26°C) and fresh air circulation (8 air changes per hour) in open atriums and department store floors. The fan’s adjustable speed syncs with foot traffic (e.g., higher speed during sales events).
Sports arenas & convention centers: Cools crowds of 1,000+ people by circulating air and reducing heat buildup from body heat and lighting. The fan’s wide airflow angle (120°) ensures coverage of seating areas and event floors.
Manufacturing warehouses: Removes heat from production lines (e.g., metal fabrication, plastic molding) and circulates fresh air to prevent worker heat stress. The fan’s high airflow (12,000 m³/h) reduces indoor temperatures by 3–5°C in unconditioned warehouses.
Agricultural greenhouses: Circulates air to maintain uniform temperature (25–30°C) and CO₂ levels (800–1,200 ppm) for crop growth. The fan’s EC motor operates quietly, avoiding disturbance to sensitive plants (e.g., hydroponic lettuce).
The EC motor reduces energy consumption by 40%—e.g., a fan operating 24/7 uses 2,452 kWh/year vs. 4,087 kWh/year for a comparable AC fan. At 0.15/kWh, this saves 245 annually per fan.
Yes—supports BACnet, Modbus, and DALI protocols, enabling integration with BMS platforms (e.g., Siemens Desigo, Johnson Controls Metasys). This allows scheduled operation (e.g., off during nighttime hours) and automatic adjustments based on temperature/CO₂ levels.
Yes—optional IP54-rated housing protects against rain, dust, and wind, making it suitable for outdoor-covered areas. The fan’s motor is sealed to prevent moisture ingress, ensuring reliable operation in outdoor conditions.
Under 24/7 use, the fan requires only semi-annual maintenance: cleaning the impeller (to remove dust buildup) and inspecting the bearings (no lubrication needed for EC motor bearings). This reduces maintenance costs by 60% vs. AC fans (which require quarterly lubrication).
